General > WebCat/WebCatPlus
MINI-MAX/51-E and WebCat
(1/1)
hawui1:
Some questions about WebCat:
Is it possible to run a working webcat (although with very limited resources) with just a MM/51-E board alone ? or it\'s mandatory to buy an MMC or a RAM/FLASH peripheral board ?
Does the MMC board come with the cable to connect it with the MM/51-E board ?
Does the MMC board already include the MMC or it has to be bought separately ?
To build a fully functional WebCat server is it ok to buy (in addition to the MM/51-E card I already have)
1) MMC-RTC-1
2) MMC card for the above one
Last question, is it possible to change the I/O status of the MM/51-E board via commands like "http://192.168.0.1/lights.asp?CLR=P1.0"
without any additional board ?
Thanks in advance for the help
vitaliy:
>Is it possible to run a working webcat (although with very limited resources) with just a MM/51-E board alone ? or it\'s mandatory to buy an MMC or a RAM/FLASH peripheral board ?
It is possible to run WebCat without MMC, RAM-1 boards if AT24C1024 EEPROM is installed into a DIL-8 machine socket on MM/51-E board.
In that case all the files served from serial EEPROM.
> Does the MMC board come with the cable to connect it with the MM/51-E board ?
The MMC board can be installed on top of MM/51-E without a cable. If you need a flat cable it can be purchased separately.
> Does the MMC board already include the MMC or it has to be bought separately ?
separately
>To build a fully functional WebCat server is it ok to buy (in addition to the MM/51-E card I already have)
1) MMC-RTC-1
2) MMC card for the above one
YES
> Last question, is it possible to change the I/O status of the MM/51-E board via commands like "http://192.168.0.1/lights.asp?CLR=P1.0"
without any additional board ?
It is possible if your setup has any file storage ( MMC, RAM-1, AT24C1024 EEPROM) to keep lights.asp.
hawui1:
Thankyou vitaliy,
Just ordered an MMC-RTC board from a reseller here in Europe ;)
vitaliy:
Please follow my instructions to get started with MMC
- format MMC Card using a PC reader to FAT (! Not FAT32 !)
- file naming should be 8 characters with 3 character filename extension (xxxxxxxx.xxx)
- copy the file directly at the root directory of MMC (! No Subfolders !)
- copy config.txt and password.txt from Webcat DEMO files/folder to MMC card
(please make sure you modify the IP address, password, user name etc. with your settings)
Navigation
[0] Message Index
Go to full version