« previous next »
Pages: [1]   Go Down

Author Topic: MINI-MAX/51-D Communication problem  (Read 9957 times)

guven_ankara

  • Guest
MINI-MAX/51-D Communication problem
« on: October 11, 2004, 02:30:08 am »
Last week i bought a MINI-MAX/51-D board with the processor AT89C51ED2 and i could not connect to the board so far.The error is below:

T89C51Rx2 DETECTED ON MM51C BOARD
  Trying 115200 baud...
   .
   .
   .
  Trying 4800 baud... etc.

Finally I get this error :

  ERROR: T89C51Rx2 not detected on MM51C board
  NOTE: Please check power, or serial connection (like this..) OR please check COMM port options-->target etc.
error.
  Error downloading \'led.hex\'.
  Error downloading led.hex to target board, ec=2143

I need a urgent solution to this problem...
Please help me!
« Last Edit: October 11, 2004, 09:10:49 am by guven_ankara »
Logged

vitaliy

  • Full Member
  • ***
  • Posts: 30
    • View Profile
Re: MINI-MAX/51-D Communication problem
« Reply #1 on: October 12, 2004, 09:47:59 am »
Please download the latest release from http://www.bipom.com/software.shtm
This known problem was fixed a few months ago.
Mini-Max/51-C loaders of the new releases were modified to support AT89C51ED2 chip.

Best regards,
Vitaliy
Logged
Pages: [1]   Go Up
« previous next »